HOME ABOUT US CONTACTS FORUMS LINKS SITE MAP

THE TOP 5
5-point VS. Shield
Shield Booster Dangers
Lap Belt Dangers
Front-Facing Too Soon?
Locking in a Child Seat

SHOPPING GUIDES
Infant Seats
Convertible Seats
Combination Seats
Booster Seats

THE BASICS
Rear-facing
Forward-facing
Booster

OTHER INFORMATION
Air Travel
Aftermarket Products
Child Seat Types
Used Seat Checklist
The Best Infant Seat

The question child passenger safety experts hear the most is "What is the best seat?"  The answer isn't a specific brand or model, but this: The best seat is the one that fits your child, fits your car, fits your budget,and that you will use correctly every time.

How do you get to that one? By knowing what you're looking for. This should get you started.


Infant seat with Base

What is an infant seat?


Infant seat without base


An infant seat is a seat that faces the back of the car, never the front. Infant seats are designed to fit newborns up to about 20-22 lbs. Most are designed to be used as a car seat and carrier, and have some type of handle to allow you to transport baby from car to restaurant, home, shopping, etc. Most come with a base that stays in the car, there are a few that do not have bases. Most seats that have a base can also be installed without it. For premature babies, a carbed may be needed - check with your hospital, pediatrician or e-mail me for more information. The infant seat is placed in the vehicle reclined at no more than 45 degrees from vertical. They range in price from $30-150.



Fits your child

An infant seat is generally chosen before the baby arrives. That makes it difficult to choose a seat that will fit someone you've never seen and may only have a vague idea of how big/little s/he will be. Babies come in all different shapes and sizes. Most of them prefer to remain in the "fetal" position for several weeks after birth, making it difficult to secure them in a car seat. When looking at all the different seats, there are several things you'll want to make sure they have to get the best fit for your child.

More than one set of harness slots The harness slots are the slits in the back of the seat where the harness straps come through. In an infant seat, the harness needs to come out of the seat AT or BELOW the baby's shoulders. Some seats only have one set of harness slots - this may be too high for a newborn and too high could mean inadequate protection.

A Five-Point Harness Although the five-point harness is MORE important when choosing a convertible seat, it is still a good idea to have in an infant seat. As I mentioned before, many babies prefer to curl into the fetal position for many weeks following birth and it may be difficult to get the harness to properly fit the baby. A five-point harness has a strap going over each shoulder, one over each hip, and they connect to the strap coming between the legs. This gives a snugger fit, and keeps baby in the right place better. There have been cases where babies in three-point harnesses have actually squirmed out of position and ended up with their entire body on one side of the harness - this is not something you want to happen right before a crash!

Easily Accessible Harness Adjuster One of the most important parts of safely transporting your child is to buckle them snugly. Babies grow quickly and seem to change size-wise on a regular basis. They also fit differently in a seat depending on what they're wearing. If the harness adjuster is easy to access and use, it's much more likely that you'll use it every time to be sure that the harness is snug. You should not be able to pinch a vertical fold in the harness at the collarbone level. Here are some common harness adjuster types on my 1-5 difficulty scale (1 is EASY, 5 is DIFFICULT):
One-sided in back This is on the back of the seat. To tighten the harness, you need to pull in the back while manually re-adjusting the length of each harness section in the front. To loosen, you lift a lever in the back and pull slack out in the front and manually re-adjust each section until the harness is the desired fit. (3)
Two-sided in back This is also on the back of the seat, is generally on a seat with the five-point harness. To tighten, pull on the strap on each side of the back. You may still need to manually re-adjust the length of the straps between the hip section and shoulder section, but it's easier to use than the one-sided. To loosen, lift the lever and pull the slack out in the front to desired fit. (2)
Metal Slide This type is not used on current new models, but may be found on older seats, such as an infant seat that was used for an older child This is on the back of the seat. It is permanently connected on one end to the harness. The other end of the harness threads through it and can be tightened or loosened. This type can be VERY unsafe, as most people do not realize that after threading the strap through at the desired tightness, the harness must be looped back through one more time so the amount of metal clip showing resembles a "C" and not an "O" - forgetting to do so could cause the harness to slip in a crash and the child could be ejected. (5)
Metal Bar This is also on the back of the seat. The harness is sewn together in a bunch of places to create a number of different "notches". The metal bar slides into the notches on each side and then slides into place on the seat back. Each time you want to adjust the harness, this bar must be taken off the seat back, each harness strap taken off the bar and then moved to the desired notch and re-threaded, then the bar is replaced on the seat. Since I've never seen a seat with this harness adjustment used with a snug harness, I'm going to say pretty difficult. (5)
On harness straps in front This type is fairly new. The adjuster actually attaches permanently to one end part of the strap and the other part threads through it, so what looks to be one strap running up to the shoulder is actually two straps, joined at the harness adjuster. I find this difficult to use for two reasons - first, it's just kind of HARD to get the harness in and out until you get used to the mechanism; second, on some seats the harness adjuster is actually in the way of the chest clip being in the correct place. It also looks rather uncomfortable for baby. (4)
On seat in front This is definitely the easiest. The adjuster is a strap on the front of the seat, between baby's legs. To tighten, simply pull. To loosen, pull up on the lever just above the strap and pull the harness out with the other hand. (1)



Fits your car

Many people don't realize that not every car seat fits in every car. Many vehicles have humps, sloped seats and buckle configurations that are completely INCOMPATIBLE with some car seats. Unfortunately, the only way to tell if a seat will fit is to try it out. Many baby specialty stores and places like Toys R Us/Babies R Us will allow the customer to leave a drivers license at the front desk and take seats out of the store to try them out in the car. When installing the seat, you need to be sure that it is locked into place. Check your car's owner's manual to find out how to lock your child restraint in. There should be less than 1 inch of movement side to side and from back to front. To check for seat movement, grab the seat where the seat belt threads through on either side and pull from side to side and from the back of the seat toward the front. Use gentle tugs - any forceful movement can dislodge even the tightest installation. A rear-facing seat will have normal movement back and forth and side to side at the TOP of the seat - this is the way it's designed to protect baby.

You can also check the compatibility database. This database is not a complete listing of all car seats and vehicles, but usually has at least a few entries for most vehicles, giving you an idea of what might fit.



Fits your budget

Not everyone can afford the most expensive model and many don't even want it or can’t use it. And in the car seat industry, most expensive isn't always "best". When choosing an infant seat, you need to keep in mind that your child will be using this for probably less than a year. The infant seat is outgrown when the child either reaches the upper weight limit - usually 20 or 22 lbs - or the top of the child's head is less than one inch from the top of the seat shell. While you want a functional seat, you shouldn’t go all out on the infant seat and have nothing left over for a nice convertible, which your child will spend 3-4 years in. Make a list of options that you want and prioritize it, then go shopping. Find something that fits your needs but doesn't bankrupt you.



Use correctly every time

A car seat will not protect your child unless it is used correctly. Every time. Here are some features to think about:

Used seats Make sure the safety seat is less than 10 years old (preferably less than five) and has never been used in a crash, even a minor fender-bender. You can't be sure about the history of a used safety seat unless you got it from a friend or relative. You will need the detailed instruction booklet which can be ordered from the manufacturer if it is missing, to check that the safety seat has all of its parts and to find out how to use it correctly. Check for possible damage, such as cracks in the plastic, frayed straps, stiff buckles or harness adjusters. You can follow the USED SEAT CHECKLIST to determine whether your used seat is still safe.

Base vs. No Base In crash tests, properly used seats tested slightly better without a base. HOWEVER, this does not mean you should run out and buy a seat without a base. If you have a base, once it's installed, you're done. Simply latch the seat into the base every time and make sure it's latched in. If you don't, you will have to CORRECTLY install your car seat every time you want to go somewhere. While some car seat/vehicle combinations make this easy, most do not. You have to decide whether you really think you are going to be able to correctly install your seat every time. That includes all the times you're running late or just have to run to the store quickly. Even if you plan to leave your infant seat in the car all the time, a base may still be a better choice. A baseless seat installs with the seat belt over the top of the seat, so getting baby in if the seat is already buckled in can be difficult, meaning you will still have to re-install the seat for each ride.

Chest clip - two-piece vs. paperclip style The chest clip does not protect your child in a crash - it protects them BEFORE the crash. The clip is there to help keep the straps on the shoulders. If it is improperly placed over the stomach instead of at armpit level, it won't be doing its job and the straps may slip off baby's shoulders - something you don't want to happen just before somebody runs into you. For newborns, the type of chest clip doesn't matter. But as babies grow and mature, that may become a source of entertainment. The paperclip style of chest clip is permanently attached to the straps on one side, then the other strap slides under the clip and into the other side of the clip. There are several problems with this type: First, not many people thread it right – under the clip and into the notch – and that can keep it from functioning properly; second, the "tab" on the clip can get bent out of place with repeated use, making it difficult to get the clip to work at all; third, many babies find it very easy to push this type down out of place. The two-piece chest clip is permanently attached to each side of the harness and clips together in the middle after baby is in the seat. It tends to wear longer, and the style is more difficult for baby to push out of place.



Other things to check out

The Handle  Handle designs differ. Many LOOK comfortable, but end up feeling awkward. Though it may be a little silly, I highly recommend taking along a 10 lb bag of sugar on the shopping trip, putting it in each seat you are thinking about and going for a short stroll. If you have to hold your arm out at an odd angle or find the carrier too heavy, you may want to keep looking for one that works better for you, especially if you'll be going lots of places. Also be sure to read the owner's manual to find out where the handle needs to be stored when the seat is installed in the vehicle.  Some manufacturers require the handle to be down (curved around the top edge of the seat) while others specify that the handle must be up.  If the handle is required to be down, it may not fit correctly in your vehicle, so check!

The Base  Many bases now come with an adjustable "foot" to help you get the right angle of recline. For newborns, the seat should be about 45 degrees, but no more than that. For older babies, more upright is okay, as long as they have good head control.

The straps  The thicker or wider the straps are, the less likely they are to twist. Twisted straps are a danger to your baby.

The buckle  Some seats come with an adjustable buckle position – closer to baby for newborns, farther toward the seat edge for older babies – that will help get a snug fit.

The accessories  Some seats come with, or fit into a "travel system". Although you may love the seat, the travel system may be hard to use. Many have very lousy steering control or are very bulky. Before purchasing a seat "just because" it fits on a stroller, check out other options. These include “car seat bars” that attach to many regular strollers, or several stroller "frames" that fit or adapt to most infant seats.

The extras There are a few things that add extra protection or ease of use to a seat:
  • Built-in locking clips - These eliminate the need for regular locking clips and are EASY to use.
  • Level indicators - Some are little balls or a swinging wheel that must fall in a certain colored area. They can be incorrect if your vehicle is on a slope, so be sure you’re on a flat surface. Others are just a line on the seat that must be parallel to the floor of the car. These make it easier to get the correct angle when installing the seat.
  • EPS foam - this stands for Expanded PolyStyrene foam – basically the same stuff in bicycle helmets – and can protect your child's head in a crash.
  • Head cushion/support - Many people prefer to have these for their newborns, hoping that it'll help keep their child's head from flopping around. However, unless it comes with the seat, it isn't safe to use one. Only the ones that come in the seat have been crash tested and will not be a problem in a crash. If it doesn’t come in the seat, it can compress enough that your child could be ejected from the seat. If it is important for you to have this, look for a seat that is sold with the head support, which should match the fabric of the seat cushion. The other option is to use a rolled receiving blanket that does not go under baby or interfere with the straps at all.
  • Extra Bases - Some seats that come with bases allow you to purchase extra bases from the manufacturer or retailer to use in other cars. If you use more than one vehicle on a regular basis, this may be a good thing to purchase.
  • A Certified Child Passenger Safety Technician This doesn't actually come with the seat. You'll have to go out and find one in your area. Since the misuse rate is about 95% and most parents don't realize that they fall under that misuse rate, it is very important to have a certified child passenger safety expert teach you how to safely use your seat. Note that a recent survey found that 96% of parents thought they were using their seats correctly and 90% of them were wrong! Motor vehicle crashes are the LEADING cause of death to children under 15, and being in a properly used seat reduces the risk by 71% for infants in the rear-facing position and 54% for toddlers in the forward-facing position. The safer your child is, the better chance they have at surviving a crash, and that's why you're getting the seat in the first place anyway! Let a certified technician teach you how to PROPERLY use your seat.


Finally, don't hesitate to ask for help. There are a lot of seats out there and it can be confusing. We welcome e-mails from people who are searching for a seat.  Please note: due to the large volume of e-mail we receive, it may take 1-2 weeks for us to reply.  If you have a pressing question, we highly recommend you visit the car seat board where many knowledgeable certified technicians are happy to answer your car seat questions.

Good luck! and happy shopping.

Copyright ©  CPSafety
All Rights Reserved